シボレー カマロ
I [1967 .. 1969] 世代. ホイール装備ガイド どのホイールとタイヤがシボレー カマロI [1967 .. 1969]に合うか確認
シボレー カマロ I [1967 .. 1969] - 改良
Petrol:
3.8 230cid I6 140hp 4.1 250cid I6 155hp 4.6 283cid V8 195hp 4.9 302cid Z28 V8 290hp 5.0 302cid Z28 V8 290hp 5.0 307cid V8 200hp 5.3 327cid V8 210hp 5.3 327cid V8 275hp 5.7 350cid V8 250hp 5.7 350cid V8 255hp 5.7 350cid SS V8 295hp 5.7 350cid SS V8 300hp 6.5 396cid SS V8 325hp 6.5 396cid SS V8 375hp 6.5 396cid SS V8 350hp 7.0 427cid SS V8 425hpシボレー カマロ I [1967 .. 1969] 3.8 230cid
140 hp
シボレー カマロ I [1967 .. 1969] 4.1 250cid
155 hpシボレー カマロ I [1967 .. 1969] 4.6 283cid
195 hpシボレー カマロ I [1967 .. 1969] 4.9 302cid Z28
290 hpシボレー カマロ I [1967 .. 1969] 5.0 302cid Z28
290 hpシボレー カマロ I [1967 .. 1969] 5.0 307cid
200 hpシボレー カマロ I [1967 .. 1969] 5.3 327cid
210 hpシボレー カマロ I [1967 .. 1969] 5.3 327cid
275 hpシボレー カマロ I [1967 .. 1969] 5.7 350cid
250 hpシボレー カマロ I [1967 .. 1969] 5.7 350cid
255 hpシボレー カマロ I [1967 .. 1969] 5.7 350cid SS
295 hpシボレー カマロ I [1967 .. 1969] 5.7 350cid SS
300 hpシボレー カマロ I [1967 .. 1969] 6.5 396cid SS
325 hpシボレー カマロ I [1967 .. 1969] 6.5 396cid SS
375 hpシボレー カマロ I [1967 .. 1969] 6.5 396cid SS
350 hpThe size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)
UN-series Ex.: 9/16" - 18 UNF
Thread size (in) - thread pitch
UNF - Unified National Fine Thread
Example: 215/55 R16 91 T
215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness
Rating
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.
