車種、タイヤサイズ、またはリムの検索フォーム 車両の装備データを取得する、または条件に一致する車両を見つけるには、下のタブのいずれかを選択してください。

一致するホイールを見つけるには、メーカー、年式、車種を指定します:
一致する車両を見つけるには、下のフィールドの値を指定します:
一致する車両を見つけるには、下のフィールドの値を指定します:
一致する車両を見つけるには、下のフィールドの値を指定します:
±
±

2019 メルセデス・ベンツ スプリンター ホイール装備ガイド どのホイールとタイヤが2019メルセデス・ベンツ スプリンターに合うか確認

メルセデス・ベンツ

メルセデス・ベンツ スプリンターの他のモデルイヤーのホイール装備情報を見る:
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995
ページ更新: 13/01/2023 07:29
タイヤ用語集
このページで見ることができるタイヤ用語

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed